Brinkmann Series 2630 Manuel d'utilisateur

OFFHIGHLOWOFFHIGHLOWOFFHIGHLOWOFFHIGHLOWMAXIMUM SIDE BURNER LOAD = 15 lbs.1. Read and follow all warnings and instructions in owner’s manual before li

9OPERATING THE GRILL:Never use Charcoal or Lighter Fluid inside your Natural Gas Grill. Read and follow all warnings andinstructions contained in the

ROTISSERIE COOKING:• Your grill was pre-drilled from factory to include mounting holes for a Brinkmann rotisserie (soldseparately). Do not use a rotis

TRANSPORTING AND STORAGE:• Never move a grill when it is hot or when objects are on the cooking surfaces.• Make sure that natural gas supply is shut o

BURNER ASSEMBLY/MAINTENANCE• Although your burners are constructed of cast iron, they may rust as a result of the extreme heat andacids from cooking f

TROUBLE SHOOTING:Problem: Possible Causes:• Burner will not light1. Check natural gas supply.2. Bad electrode spark.Check to see if the grill will “ma

14• To protect your grill from excessive rust, the unit must be kept clean and covered at all times when not inuse. A grill cover may be ordered direc

15ASSEMBLY INSTRUCTIONSREAD ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLYBEFORE ASSEMBLING OR OPERATING YOUR GRILL.WE RECOMMEND TWO PEOPLE

16(Proof of purchase will be required.)Inspect contents of the box to ensure all parts are included and undamaged.1FOR MISSING PARTS, PLEASE CALL CUST

174 M6 X 12mm bolts8 M6 X 20mm bolts14 M6 X 60mm bolts1 AA /1.5V Alkaline batteryPARTS CARD CONTENTSMake sure you have all items listed under PARTS LI

Choose a good, cleared assemblyarea and get a friend to help you putyour grill together. Lay cardboarddown to protect grill finish andassembly area.St

WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE.THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOURATTENTION TO POSSIBLE HAZAR

19Step 4Attach back cart panel by using sixM6 X 60mm bolts.Note: Leave bolts hand tight untilStep 11.Step 5Install door bracket using the four#10 X 1/

Step 7Attach the grease tray bracket ontothe back cart panel by inserting thethree tabs into the slots on the backcart panel.Note: When performing Ste

21Step 9Attach side burner assembly to grillbody assembly by inserting fourM6 X 20mm bolts through theholes in the side burner assemblyand into holes

Step 12Attach side table/ice bucketassembly to grill body assembly byinserting four M6 X 20mm boltsthrough the holes in the sidetable/ice bucket assem

Step 14Insert grill bottom into opening onbackside of grill. Make sure to slidetray onto tracks as illustrated.Step 15Slide grease tray into grease tr

24Step 18Place the stainless steel heatshields on lower level of grill bodyassembly directly above burners.Step 19Place stainless steel cooking grills

PROFESSIONAL SHISH-KABOB SKEWERSThese heavy-duty, 18" shish-kabob skewers are extra-long for fabulousrestaurant style kabobs. Made of rust resist

ACCESSORIESLOOK FOR THESE AND OTHER BRINKMANN ACCESSORIES AT YOUR LOCAL RETAILERWHERE SMOKERS ARE SOLD, OR ORDER DIRECT BY CALLING1-800-468-5252.THE U

10/03140-2630-0WARRANTY©2002 The Brinkmann CorporationDallas, Texas 75244 U.S.Awww.brinkmanncorp.comThe Brinkmann Corporation warrants to the original

2WARNING• Never use liquid propane gas (LP) in a unit designed for natural gas.• Never use charcoal briquets or lighter fluid in a gas grill.• Leak te

3WARNINGWARNING• DO NOT use hard metal piping of any kind to connect this type of grill to a natural gas source.Use only hose specified by manufacture

4• Never use your grill without leak testing all gas connections and hoses. See the section on“Leak Testing” in this manual for proper procedures.• Vi

LEAK TESTING:To prevent fire or explosion hazard:• DO NOT smoke or permit ignition sources in the area while conducting a leak test.• Perform test OUT

WARNING66. Check each place listed (A -G) for growing bubbles which indicates a leak.7. Turn OFF gas supply at natural gas supply.8. Turn on control k

LIGHTING INSTRUCTIONS:Follow the instructions exactly.1. OPEN THE GRILL LID before attempting to light a burner so that fumes do not accumulate inside

LIGHTING THE SIDE BURNER:1. Open lid to the side burner before lighting.2. Turn on the side burner by pressing in and rotating thecontrol knob to the